Example Application; Step 1. Create The I/O Table; Step 2. Make The Unit Setup Settings From The Cx-Programmer - Omron CS CJ1W-ETN21 Operation Manual

Example Application

3-9

Example Application

3-9-1

Step 1. Create the I/O Table

3-9-2

Step 2. Make the Unit Setup Settings from the CX-Programmer

Local Mail Address (SMTP
Tab)
Initial POP3 Server
Settings (POP Tab)
Initial Settings for the Mail
Receive Function
Mount the Ethernet Unit in the CPU Rack or Expansion Rack, connect online
with the CX-Programmer or Programming Console, and create the I/O table.
With the CX-Programmer connected online, select the Ethernet Unit in the
CX-Programmer's PLC I/O Table Window, right-click and select Unit Setup
from the popup menu. Make the following settings in the CPU Bus Unit Setup
Area from the CPU Bus Unit Setup Window.
Item name
Local mail address ETN21@omron.co.jp
Item name
Server specification type
Host name
Port No.
Account Name
Mail password
Server access interval
• DNS Server IP Address Setting (DNS Tab, When Required)
Item name
IP Address 10.6.57.11
Port No. 53
Retry timer 10
Item name
Posting Mail Address Protect using mail address
Protection Setting
Mail address
Receive Attached Receive file with specified
File Setting extension only
Example
Example
Host Name
mail.omron.com
110
omronID
omronPS
5 minutes
Example
Not selected
None
Not selected
Section 3-9
Example
65