Using Socket Service Functions
6-5-3
Setup Tab
108
The CPU Bus Unit System Setup, which is set when using socket services, is
shown in the CX-Programmer's Unit Setup Window.
■ Setup
Item
Broadcast
IP Address
Sub-net Mask
Details
Set the method for specifying IP address
when broadcasting with FINS/UDP.
• All 1 (4.3BSD): Broadcast with host
number set to all ones.
• All 0 (4.2BSD): Broadcast with host
number set to all zeros.
For normal operations use the default:
All 1 (4.3BSD)
Set local IP address for Ethernet Unit.
Set the subnet mask of the Ethernet Unit.
This setting is required when the IP
Address Table method is not used for IP
address conversion.
Section 6-5
.
Default value
All 1 (4.3BSD)
0.0.0.0 (Uses
192.168.250.FINS
node address)
0.0.0.0
(Uses default net-
mask of IP
address setting.)