Mail Receive Function Specifications; Function Specifications - Omron CS CJ1W-ETN21 Operation Manual

Mail Receive Function Specifications

Remote mail command type
File memory opera- Performing file operations on a
tions Memory Card in the CPU Unit
or EM file memory
Backing up data in user mem-
ory (user program or parameter
area)
Reading/Clearing the error log
Reading/Clearing the e-mail log
Performing an e-mail send/receive test
Sending a FINS command
3-2

Mail Receive Function Specifications

3-2-1

Function Specifications

Received E-mail
Item
Protocol used
Subject
E-mail body
36
POP3 (Port number: 110/TCP; can be changed in the CPU Bus Unit Setup.)
The user can enter one of the following remote mail commands in the subject line.
Command type
Accessing the CPU Unit's I/O memory area
Changing the CPU Unit's operating mode
File memory opera- Performing file opera-
tions tions on a Memory
Card in the CPU Unit
or EM file memory
Backing up data in
user memory (user
program or parameter
area)
Reading/Clearing the error log
Reading/Clearing the e-mail log
Performing an e-mail send/receive test
Sending a FINS command
The user can enter parameters for the commands listed above.
Contents
A file can be attached to read/
write data in any file in EM file
memory or a Memory Card
mounted in the CPU Unit. It is
also possible to delete files and
list files.
The CPU Unit's user program
or parameter area data can be
backed up to a file in EM file
memory or a Memory Card
mounted in the CPU Unit.
The error log in the CPU Unit, a
CPU Bus Unit, or a Special I/O
Unit can be read or cleared.
The Ethernet Unit received e-
mail log can be read or cleared.
An e-mail send/receive test can
be performed with the Ethernet
Unit.
Any FINS command frame can
be entered in the e-mail and
sent through the Ethernet Unit
to a specified unit address.
Specification
Remote mail command
• IOMWrite (I/O Memory Write)
• IOMRead (I/O Memory Read)
• ChangeMode (Operating Mode Change)
• FileWrite (File Write)
• FileRead (File Read)
• FileDelete (File Delete)
• FileList (File List Read)
• UMBackup (User Memory Backup)
• PARAMBackup (Parameter Area Backup)
• ErrorLogRead (Error Log Read)
• ErrorLogClear (Error Log Clear)
• MailLogRead (Mail Log Read)
• MailLogClear (Mail Log Clear)
• Test (Mail Test)
• FinsSend (FINS Command Send)
Section 3-2
Remote mail command
• FileWrite (File Write)
• FileRead (File Read)
• FileDelete (File Delete)
• FileList (File List Read)
• UMBackup
(User Memory Backup)
• PARAMBackup
(Parameter Area Backup)
• ErrorLogRead (Error Log
Read)
• ErrorLogClear (Error Log
Clear)
• MailLogRead (Mail Log Read)
• MailLogClear (Mail Log Clear)
• Test (Mail Test)
• FinsSend (FINS Command
Send)