Omron CS CJ1W-ETN21 Operation Manual page 148

Sysmac cs and cj series ethernet units construction of applications
Hide thumbs Also See for CS CJ1W-ETN21:
Table of Contents

Advertisement

Using Socket Services by Manipulating Dedicated Control Bits
TCP Socket Send Request
124
Response
code
004F
ICMP data received (EHOSTDOWN).
(See note.)
0051
ICMP data received (EHOSTUNREACH).
(See note.)
0053
Error in communications with remote host (ETIMEDOUT).
0066
Internal memory cannot be obtained; cannot execute.
0080
Receive request timed out.
0081
The specified socket was closed during receive processing.
Note These response codes will be returned only on large, multilevel networks.
Response
code
0000
Normal end
0302
CPU Unit error; cannot execute.
1100
Number of bytes to send not in allowable range.
1101
The area designation of the Send/Receive Data Address is not in
allowable range.
1103
The bit number in the Send/Receive Data Address is not 00.
110C
Request Switch turned ON during other processing.
220F
Specified socket is already processing a send request.
2210
The specified socket is not been connected.
2211
Unit is busy; cannot execute.
2607
Specified Socket Service Parameter Area is already being used for
another socket.
0020
Connection with remote socket broken during send (EPIPE).
003E
Internal buffer cannot be obtained due to high reception traffic
(ENOBUFS).
0042
The remote IP address is a broadcast address and the number of
(See note.)
bytes to send is greater than 1,472 bytes (EMSGSIZE).
0044
ICMP data received (ENOPROTOOPT).
(See note.)
0045
Error in communications with remote node (ECONNABORTED).
(See note.)
004A
Error in communications with remote node (ECONNREFUSED).
004B
Error in communications with remote node (ECONNRESET).
(See note.)
004E
Remote IP address parameter error (ENETUNREACH).
(See note.)
004F
ICMP data received (EHOSTDOWN).
(See note.)
0051
Remote IP address parameter error (EHOSTUNREACH).
(See note.)
0053
Error in communications with remote node (ETIMEDOUT).
(See note.)
0081
The specified socket was closed during send processing.
Note These response codes will be returned only on large, multilevel networks.
Section 6-7
Meaning
Meaning

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs cs1w-etn21Sysmac cs1w-etn21Sysmac cj1w-etn21

Table of Contents