Remote Mail Command Details; Format - Omron CS CJ1W-ETN21 Operation Manual

Remote Mail Command Details

3-4

Remote Mail Command Details

3-4-1

Format

Command Format
Response Format
42
Item
MailLogClear
Test
FinsSend
To:
etn@omron.co.jp
CC:
Subject:
FileWrite
Para1: MEMCARD ¥user
Body:
Para2: Overwrite=OK
#Overwrite OK
Attached file:
Write.iom(98KB)
To:
Command@omron.com
CC:
Subject:
Re:FileWrite
Response Code:0000
Body:
Response Status: Normal end
>Para1:MEMCARD ¥user
>Para2:Overwrite=OK
>#Overwrite OK
>----- (Attached File was deleted) ----
Read.iom(98KB)
Attached file:
Contents
Select when you want to execute the
Mail Log Clear command.
Select when you want to execute the
Mail Test command.
Select when you want to execute the
FINS Command Send command.
Enter the Ethernet Unit's local mail address.
Enter the command name.
Enter the command's parameters, as follows.
Note: Enter standard US-ASCII characters only.
· Identify the parameter number at the beginning as ParaXX.
· Enter each parameter on a separate line.
· Enter any comments after the "#" character.
Attach a file when required.
Returns response to the originating e-mail address.
The command name will be returned after "Re:".
Response information will be returned in the following order:
· The response code will be returned after "Response Code:".
· The response status will be returned after "Response Status:".
· The original e-mail's parameters are returned after ">" characters.
· The original e-mail's attached file will be deleted.
A file will be attached if the response requires an attached file.
Section 3-4
Default
Selected
Selected
Not selected