Call Allocation For Incoming Analogue Trunk Calls; Changing The Analogue Destination Extension During The Day - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
10.6.5

Call allocation for incoming analogue trunk calls

In contrast to incoming ISDN calls, it is not possible to reach extensions using direct dialling in
with analogue trunk calls.
Each analogue trunk line is, therefore, permanently assigned to an destination extension (an
extension or a call group). In default, this destination extension is extension 11.
Each analogue destination extension is assigned a call destination list which specifies
the exact call procedure (e.g. call forwarding, forwarding time, etc.).
The layout and programming of the 16 possible call destination lists is described in Section
10.6.7.
10.6.5.1

Changing the analogue destination extension during the day

In the case of incoming analogue trunk calls during the day, each analogue trunk line can be
assigned any destination extension.
Example: extension 23 is programmed as the analogue destination extension for line 3.
Input sequence
A 1 5 1 7
B #
C 3
D <OK>
E *
23
F
G <OK>
H <F8>
The new analogue destination extension for line 3 during the day is now extension 23.
Example: extension 23 is to be assigned a call forwarding destination (additional forw. ext.) that
differs from that of the other extensions for external daytime calls. This ext. must be assigned
to a specific call destination list (call destination list 11 in this example), see also Section 10.6.7.
Input sequence
A 1 5 1 9 3
B #
10-44
Meaning
Call allocation per line, day
(select line 1–32 with "+" and "–" or
directly with "#")
Select line
Select line
Confirm input
Change input
Destination extension = 23
Confirm input
Return to Start menu
Meaning
List assignment for ext.11 during the
day
(select ext.11–74 or group 881–888
with "+" and "–" or directly with "#")
Select extension
Display
Line 1: 11
Line:
Line: 3
Line 3: 11
Line 3:
Line 3: 23
Line 3: 23
System administration
Display
List for ext. no. 11: 14
List for ext. no.:
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99