Setting Up The Entrance Telephones (As Of Sw Version 2.0.2) - Siemens Hicom 100 E Service Manual

Example: ext. 26 is to be set up as the entrance telephone.
Input sequence
A 2 3 1
B *
C 26
D <OK>
E <F8>
An existing entrance telephone can be deactivated by pressing the F3 key under point C.
10.5.2.2

Setting up the entrance telephones (as of SW version 2.0.2)

An entrance telephone can be connected to each free a/b extension port (max. 4). The number
of the entrance telephone extension is programmed for each door (1 to 4).
The entrance telephone must be connected via a door opener adapter if the receiving extension
for the doorbell and the door opener features are to be used.
Example: ext. 25 is programmed as entrance telephone 1, ext. 26 is programmed as entrance
telephone 2
Input sequence
A 2 3 1
B +
C 25
D <OK>
E +
F *
26
G
H <OK>
J <F8>
An existing entrance telephone can be cancelled by pressing the F3 key under points C and G.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Entrance telephone
Change input
26 is to be set up as entrance tel.
Confirm input
Return to Start menu
Meaning
Entrance telephone 1
(select door 1–4 with "+" and "–" or
directly with "#")
Change input
Ext. 25 is entrance telephone 1
Confirm input
Scroll to entrance telephone 2
Change input
Ext. 26 is entrance telephone 2
Confirm input
Return to Start menu
Programming guide
Station attributes
Display
Ext. no: –
Ext. no.
Ext. no.: 26
Ext. no.: 26
System administration
Display
Door 1: –
Door 1:
Door 1: 25
Door 1: 25
Door 2: –
Door 2:
Door 2: 26
Door 2: 26
System administration
10-25