Defining The Console Code; Defining Intercept Criteria; Defining Intercept, No Answer - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
10.6.8.3

Defining the console code

External ISDN calls are directly signalled at the intercept console if the console code is dialled
instead of the DDI number. The console code (by default "0") applies to the entire system and
can be changed.
Example: the console code is to be changed to "9".
Input sequence
A 1 5 1 2
B *
C 9
D <OK>
E <F8>
The console code can be deleted by pressing the F3 key under point C.
10.6.9

Defining intercept criteria

10.6.9.1

Defining intercept, no answer

An ISDN call from a directly dialled extension which was not answered is automatically
forwarded to the intercept console after a set period of time. The amount of time that elapses
before the call is forwarded (intercepted) corresponds to the number of ring attempts entered
in the call destination list for this extension Section 10.6.7.2.
The intercept feature can be deactivated by appropriate programming. The modification applies
to the entire system.
Example: programming intercept override, no answer.
Input sequence
A 1 5 1 5 1
B *
C 0
D <OK>
E <F8>
Intercept, no answer can be reactivated by entering "1" under point C.
10-54
Meaning
Console code with DDI
Change input
Select console code
Confirm input
Return to Start menu
Meaning
Intercept, no answer
Change input
Select intercept override
Confirm input
Return to Start menu
Display
Ext. no.: 0
Ext. no.:
Ext. no.: 9
Ext. no.: 9
System administration
Display
Intercept: yes
Intercept:
Intercept: no
Intercept: no
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99