10.3.5
Route assignment
When different line types are simultaneously used in the Hicom 100E system (e.g. trunk lines
and PBX lines), each different line type is to be assigned to a separate route.
Automatic line seizure must first be deactivated!
Example: lines 1 and 2 are to be assigned to route 1 (default status). Line 3 is to be assigned
to route 2.
Input sequence
A
1 6 2 (up to
SW2.0.2)
1 6 12(as of SW2.1)
B
+
C
+
D
*
E
2
F
<OK>
G
<F8>
One line can be assigned to one of the four routes by entering the route number 1 to 4 under
point E.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Assignment of line 1 to route 1
(select line 1–32 with "+" and "–" or
directly with "#")
Assignment of line 2 to route 1
Assignment of line 3 to route 1
Change input
Assignment of line 3 to route 2
Confirm input
Return to Start menu
Programming guide
Networking
Display
Line 1: 1
Line 2: 1
Line 3: 1
Line 3:
Line 3: 2
Line 3: 2
System administration
10-11