Trunk Code Of Main Pbx - Siemens Hicom 100 E Service Manual

Input sequence
D <OK>
E #
F 2
G *
H 2
J <OK>
+
K
L *
M 3
N <OK>
O <F8>
A route code can be deleted by pressing the F3 key under point C, H or M.
10.7.13.5

Trunk code of main PBX

If Hicom 100E is configured as the satellite station in a network, the trunk code of the main PBX
is to be entered as a "secondary trunk code" for the route containing the lines to the main PBX.
Only then is toll restriction implemented in this route.
Example: route 2 lines are networked with a main PBX. The trunk code of the main PBX is "8".
Input sequence
A 2 2 3
B +
C *
D 8
E <OK>
F <F8>
The secondary trunk code can be deleted by pressing the F3 key under point D.
A31003-K16-X001-3-7620, 07/99
Hicom 100 E Version 2.1, Service manual
Meaning
Confirm input
Select route
Enter route 2
Change input
Select route code "2"
Confirm input
Scroll to item 2
Change input
Select route code "3"
Confirm input
Return to Start menu
Meaning
Secondary trunk code
(select route 1–4 with "+" and "–" or
directly with "#")
Scroll to route 2
Change input
Select secondary trunk code
Confirm input
Return to Start menu
Programming guide
System settings
Display
Route 1, item 1: 9
Route
Route 2, item 1: 84
Route 2, item 1:
Route 2, item 1: 2
Route 2, item 1: 2
Route 2, item 2: –
Route 2, item 2:
Route 2, item 2: 3
Route 2, item 2: 3
System administration
Display
Route 1: –
Route 2: –
Route 2:
Route 2: 8
Route 2: 8
System administration
10-67