Programming guide
Station attributes
10.5.1.5
Headset
If released, this feature enables every optiset and optiset E system telephone to be equipped
with a headset.
The system automatically detects a headset adapter for optiset E telephones (applicable as of
SW 2.0.2). Class-of-service release is not required in this instance.
Example: ext.11 is equipped with a headset
Input sequence
A
1 3 6 (up to 2.0.1+)
1 3 1 6 (as of 2.0.2)
B
*
C
1
D
<OK>
E
<F8>
An activated headset feature can be cancelled by entering "0" under point C.
Telephones with headsets must have a release key.
10.5.1.6
Call pickup groups
Call pickup groups with up to 16 extensions can be set up in Hicom 100E. An extension can
only belong to one call pickup group.
Up to SW 2.0.1+, there were 2 call pickup groups, as of SW 2.0.2, 8 call pickup groups will be
available.
Example: ext. 12 and 13 are to be assigned to "call pickup group 1".
Input sequence
A
1 3 7 (up to 2.0.1+)
1 3 1 7 (as of 2.0.2)
B
+
C
*
D
1
E
<OK>
F
+
*
G
10-20
Meaning
Headset for ext. 11
(select ext. 11 to 74 with "+" and "–" or
directly with "#")
Change input
Release headset
Confirm input
Return to Start menu
Meaning
Call pickup group for ext. 11
(select ext. 11–74 with "+" and "–" or
directly with "#")
Call pickup group for ext. 12
Change input
Call pickup group 1 for ext. 12
Confirm input
Call pickup group for ext. 13
Change input
Display
Ext. 11: off
Ext. 11:
Ext. 11: on
Ext. 11: on
System administration
Display *)
Ext. 11: –
Ext. 12: –
Ext. 12:
Ext. 12: group 1
Ext. 12: group 1
Ext. 13: –
Ext. 13:
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99