Setting Call Charges In Caracas Desk With A Password; Caracas Desk Features Without Password - Siemens Hicom 100 E Service Manual

Plus products
Entrance telephones
If conflicts arise between the extension numbers, the customer data is not transferred back
to Hicom 118 and a message regarding the conflict is output. Please note that conflicts can
also arise with codes 7..., 8..., 9... and 0 (for routes by default, etc.). These codes can only
be changed with Assistant L.
For reasons of security (old customer data), the data can only be transferred back to Hicom
within 30 minutes of loading the extension numbers to Caracas Desk.
A name may not be set in Hicom 118 for the configured extensions. Names are automatically
assigned at check-in. Names must are also be assigned for service extensions and booths at
check-in. Names are only deleted for guests at check-out.
11.4.4

Setting call charges in Caracas Desk with a password

Customer-specific password: 123 (default).
Charge factor guest: with max. 3 digits after the decimal point.
Charge factor booth: for telephone booths.
Charge factor service: for service extensions.
Minimum charge guest (no basic charge).
Minimum charge booth (no basic charge).
Standard check-in: trunk access yes/no at check-in.
Standard check-out: trunk access unchanged/not at check-out.
Standard payment: trunk access unchanged/not when paying.
Display format: rounded up 100 - 10 - 1- 0.10 - 0.01 (GER) - 0.001.
Value added tax: in % with max. one digit after the decimal point.
Currency: 3-digit currency unit (max).
Change call charge settings password.
11.4.5

Caracas Desk features without password

Press the <Settings> key.
Reception telephone: lock the reception telephone.
Query/delete the call charge total counter (two can be deleted and one cannot be deleted).
Load room keys: program on reception telephone (S* 91).
11-20
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99