Figure 6-7 Isdn Intercept Day/Night - Siemens Hicom 100 E Service Manual

Initial operation
Call management (CM)
ISDN intercept during the day/at night (example)
Intercept console
ISDN connection 1
B-channel 2
Day
Intercept console
ISDN connection 1
B-channel 2
Night
Figure 6-7 ISDN intercept day/night
If an intercept position has not been entered, intercepted calls are allocated to the extension
which is assigned to the respective line according to the call allocation scheme (B-
channel=line).
The central intercept console (CDM 16 19) may only be configured in the case of
QSig.
Incoming calls are not signalled if there is a fault at the intercept console (only U
extension).
You must enter a call forwarding command to an extensions in the call destination list
of the intercept console in order to guarantee a signal. The call forwarding timeout
for this list should be set to 15 rings so that calls are not forwarded when the intercept
console is functioning properly.
6-14
Call allocation
15 13
Ext.
11
--
Entry
Call allocation
15 14
Ext.
11
--
Entry
15 17
Call Management
Ln. Ext.
2 12
Entry
15 18
Ln. Ext.
Call Management
2 14
Entry
Hicom 100 E Version 2.1, Service manual
15 193
15 194
A31003-K16-X001-3-7620
P0/E
,
07/99