Figure 11-9 Doorline M02 Entrance Telephone - Siemens Hicom 100 E Service Manual

Plus products
Entrance telephones
K1 K2 K3 K4
Actuators
STRB
Hicom 100 E
Figure 11-9 Doorline M02 entrance telephone (four receiving extensions for doorbell)
If the receiving extension for the doorbell is busy, the doorbell is only signalled when the exten-
sion becomes free. The connection to the entrance telephone is then to be set up by dialling
the relevant code.
The doorbell follows the internal call forwarding sequence programmed (V2.0.1+).
Once the cables have been laid, parameters must be set for the control relay module (STRB).
11-10
Doorline M02
O.1 O.2 O.3 O.4
analogue line
Sensors
circuit
b a
Hicom 100 E Version 2.1, Service manual
Door opener adapter box
A31003-K16-X001-3-7620
,
07/99