Incoming Call On Loudspeaker (Speaker Call 2-Way); Activating/Deactivating Stop Voice Calling; Answering A Call On The Headset - Siemens HOPATH 4000 Operating Instructions Manual

Step by Step
program/service
Feature settings?
Speaker call protect?
Activate?
Deactivate?
Headset
Headset
Incoming call on loudspeaker (speaker
call 2-way)
A colleague addresses you directly over the speaker.
The speakerphone mode is automatically activated.
Answering via speakerphone is immediately possible.
C
or Lift the handset and reply.
You can address the colleague directly
(Æ page 29).

Activating/deactivating stop voice calling

You can prevent other persons from making direct calls
to you. Any attempt to address you directly via the loud-
speaker will be changed to a normal call.
Press the key. The lamp lights up.
;<
Enter the service code.
or
Select and confirm.
Select and confirm.
and
or Confirm.

Answering a call on the headset

Precondition: The headset is connected. The headset
key has been configured.
The lamp flashes when a call is received.
Press the key to answer the call.
Ending the call:
Press the key. The lamp goes out.
Answering and making calls
25 25 25 25