Call Forwarding Times - Siemens Hicom 100 E Service Manual

Programming guide
Station attributes
Input sequence
*
F
G 11
H <OK>
J +
K *
L 888
<OK>
M
N <F8>
A destination index can be deleted by pressing the F3 key under point G or L.
The second step entails assigning call destination list 13 to ext. 20 for external calls during
the day, see "Reference for day", Section 10.6.4.1.
The third step entails entering extensions 11 to 18 as group members of call group 888,
see "Group members", Section 10.6.2.1.
10.6.7.2

Call forwarding times

The number of rings per destination index can be modified for each call destination list. The
default value for all 16 call destination lists is 3. A ring attempt lasts approx. 5 seconds.
Example: a call is to be forwarded to the next destination index in call destination list 13 after
30 seconds. The number of rings must be set to 6 (6 x 5 sec. = 30 sec.).
Input sequence
A 1 5 1 9 5
B #
C 13
D <OK>
E *
F 6
<OK>
G
H <F8>
The number of rings can be programmed by entering a value between 1 and 15 under point F.
10-48
Meaning
Change input
Dest index 2 = ext. no. 11 (ext. 11)
Confirm input
Scroll to dest. index 3
Change input
Dest. index 3 = ext. no. 888 (grp.888) List 13, dest. 3: 888
Confirm input
Return to Start menu
Meaning
Number of rings for call dest. list 1
(select list 1–16 with "+" and "–" or
directly with "#")
Select CDL
Enter CDL 13
Confirm input
Change input
Number of rings = 6
Confirm input
Return to Start menu
Display
List 13, dest. 2:
List 13, dest. 2: 11
List 13, dest. 2: 11
List 13, dest. 3: –
List 13, dest. 3:
List 13, dest. 3: 888
System administration
Display
for list 1: 3
for list:
for list: 13
for list 13: 3
for list: 13
for list 13: 6
for list 13: 6
System administration
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99