Line Codes; Route Codes - Siemens Hicom 100 E Service Manual

Programming guide
System settings
10.7.13.3

Line codes

Each line is assigned a line code by default. The codes "801" to "832" are assigned to lines 1
to 32.
Taking the remaining code plans into consideration, these codes can be changed (they may
comprise up to 3 digits).
Example: changing the code for line 1 to "833"
Input sequence
A 2 2 3
B *
C 833
D <OK>
E <F8>
A line code can be deleted by pressing the F3 key under point C.
10.7.13.4

Route codes

Each route is assigned a route code by default:
code "9" for route 1, code "84" for route 2,
code "85" for route 3, code "86" for route 4.
A route can be assigned up to 10 codes, each containing a maximum of 3 digits. Several codes
may be necessary if digit repetition is configured for this route in a network, see Section 10.3.8.
Taking the remaining code plan into consideration, route codes can be changed or additional
codes assigned.
Precondition: digit repetition is activated, automatic line assignment is deactivated, route
assignment is performed.
Example: the code for route 1 is to be changed to "9", the codes "2" and "3" are to be assigned
to route 2.
Input sequence
A 2 2 4
B *
C 9
A route code can be deleted by pressing the F3 key under point C, H or M.
10-66
Meaning
Line codes
(select line 1–32 with "+" and "–" or
directly with "#")
Change input
Select line code 833
Confirm input
Return to Start menu
Meaning
Route code, route 1 item 1
(select item 1–10 with "+" and "–",
route 1–4 directly with "#")
Change input
Select route code "9"
Display
Line 1: 801
Line 1:
Line 1: 833
Line 1: 833
System administration
Display
Route 1, item 1: 0
Route 1, item 1:
Route 1, item 1: 9
A31003-K16-X001-3-7620
Hicom 100 E Version 2.1, Service manual
,
07/99