Display Screen Symbols-Detailed Descriptions - Konica Minolta DRYPRO SIGMA Service Manual

Display Screen Symbols—Detailed Descriptions
Symbol
Power
• When steady green, the laser imager is ready to print.
• When blinking green, the laser imager is processing or printing.
• When steady yellow, attention is needed.
• When blinking yellow, the laser imager is warming up.
Error or Status Code
• A 3-digit code displays when an error or status condition is present.
• A 2-digit code displays the requested film size if the loaded film size does not match the
requested size.
Film Count and Dimensions
• Displays the number of films remaining in the film cartridge or the loaded film size
• Displays the height and width of the loaded film size
Calibrate
• When steady blue, press this symbol to initiate calibration.
• When blinking blue, calibration is in process.
• When yellow, calibration failed or a calibration error occurred.
Pause
• During normal operation, this symbol is off.
• When the film cartridge cover is open, this symbol is on.
– You can press the symbol to close the film cartridge cover.
– To avoid exposing the film to light, do not open the film supply until the symbol is off.
Film Size
• When this symbol is on, the wrong film size is loaded for the requested print job. The
Status Code display shows the requested film size.
• You can press and hold the symbol for five seconds to delete all print requests.
Restart
You must restart the laser imager. An error code also displays to indicate why the restart
is required.
Film Jam
Film is jammed. An error code also displays to indicate the location of the jam.
Maintenance
Preventive maintenance is required. An error code also displays to indicate the required
action.
9G9002 – 2011-08-15
Refer to other symbol descriptions for details.
The screen also displays the time-until-ready countdown.
If the laser imager is on and a 3-digit code does not display, the imager is operating
normally.
The code alternates between the height and width of the requested size.
Description
Diagnostics
4-3