Engine
Removing - refitting cylinder head
10.
18
Bravo-Brava 1 0
R E M O V I N G C Y L I N D E R HEAD
Place the vehicle on a lift, remove the front
wheels, disconnect the battery negative ter-
minal and then proceed as follows.
1. Remove the upper cylinder head protec-
tion by unscrewing the retaining nuts.
2. Disconnect the battery positive terminal
( 1 ) , unscrew nut ( 2 ) , raise bracket ( 3 )
and then remove the battery.
3. Unscrew the retaining bolts indicated to
remove the air intake shown.
4. Loosen the clip shown and disconnect the
air intake sleeve from the inlet manifold.
TDIOO
Publication no. 506.670/08