Check Adjust Clutch Pedal Travel Or Height - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

T R A V E L OR HEIGHT

The check should only be carried out on ve-

hicles with mechanical release devices (1370

12v - 1 5 8 1 16v - 1747 1 6v - 1910 TD - 1 929

D). The 1998 20v engine type has a hydraulic

release device.

1. Measure the clutch pedal travel:

1. Pedal in end of travel position

2. Pedal in rest position

X. Pedal travel:

155 ± 10 mm (1370 12v)

170 ± 10 mm (1581 16v - 1747 16v -

1910 TD - 1929 D)

2. In order to adjust the clutch pedal in the

rest position it is necessary:

- to let the clutch operating mechanism

- to check that the travel " X " corresponds

- any adjustments to the travel are carried

Introduction

Planned maintenance

bed in by fully depressing the pedal 2 or

to the recommended figure. The travel

is measured using a rule corresponding

to the pedal centre line and is equivalent

to the distance between the pedal in the

end of travel position (pedal in contact

with the bodyshell) and the pedal in the

rest position.

out via the nut and lock nut for the

clutch cable, gearbox side.

There should be no obstructions

the area under the pedals

the total travel of the pedals:

care, in particular, that any mats are

lying flat and not interfering with the