Fiat Bravo Service Manual page 539

Auto transmission & differential
Removing-refitting
21-27.
62
When coupling the converter to the flywheel,
use bolts of the correct length (M8x1.25
bolts with tapered shakeproof washer draw-
ing 46450230, of the dimensions indicated in
the figure) and make sure that they are not
mixed up w i t h other bolts.
1. Bolts which are too long could damage
the other end of the converter and deform
the clutch seal.
2. Bolts which are too short may not w i t h -
stand the input torque and could break.
When fitting the drive shafts, take particular
care not to damage the differential oil seal (2)
on the splined part (1) of the drive shaft. In-
sert the drive shaft perfectly horizontally. If
the seal is damaged, it could cause oil leaks.
P4A62AB03
Bravo-Brava
Make sure that the drive shaft is clean
before assembly to avoid
bodies entering into the
Publication no. 506.670/07
itti
16v
foreign
differential.
P4A62AB04