Refitting - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission & differential

1. Remove the circlip retaining the sliding

joint (gearbox side), then remove the joint

by withdrawing it from the drive shaft.

2. Undo the clips retaining the protective

gaiter on the constant velocity joint on the

wheel side, then remove the gaiter from

the side opposite the drive shaft.

3. Degrease the inside of the constant veloc-

ity joint. Using tools 1847017001 and

1860889000, and holding the circlip i n -

side the joint at the same time, remove the

joint from the drive shaft.

4. Check that the drive shaft is not deformed

or out of true, and that the surface in c o n -

tact w i t h the seal is not w o r n .

R E F I T T I N G

When refitting, reverse the

for removal.

a gaiter is removed,

to replace it, and it is im-

to fill both the constant

locity joint

or sliding joint

gaiter with TUTELA

Drive shafts