Fiat Bravo Service Manual page 805

Hide thumbs Also See for Bravo:

Table of Contents

Release the injection wiring bundle from

the retaining clip to allow access to the fit-

ting of the pipe connected to the slave

cylinder on the clutch pump.

Disconnect the fitting of the pipe connecting

clutch pump - slave cylinder.

Working from inside the car, remove the

roll pin retaining the clutch pump rod to

Unscrew the nuts retaining the clutch

pump to the body take out slightly in order

to release the rod from the clutch pedal,

then remove complete w i t h connection

pipe leading to the reservoir.

Working on the bench, separate the clutch

pump from the pipe connected to the

assemble. To refit the pump

tion line to the reservoir, first position

the rubber fitting over the hole in the

body, and then thread the pipe from

inside the car into the engine bay.

Clutch operation