Gearbox and differential
External controls
21.27
10
P4A01BB04
1. Remove the battery drip tray undo the
bolts fixing it to the bodyshell.
2. Disconnect the end of the gear engage-
ment cable and undo the bolts fixing it to
the mounting bracket.
3. Disconnect the end of the gear selector
cable, then move the gear selector and en-
gagement cable assembly to the side of
the engine compartment.
4. Raise the vehicle and disconnect
handbrake cables from the support and re-
lease them from the bracket.
5. After having disconnected the electrical
connection for the Lambda sensor, undo
the bolts fixing the exhaust pipe to the
manifold.
P4A02BB04
P4A10BB03
Bravo-Brava ft 1 *
98 range
P4A02BB03
P4A10BB04
Print no. 506.670/77
the