Fiat Bravo Service Manual page 381

Hide thumbs Also See for Bravo:

Table of Contents

Lower the lift

1. Turn the toothed drive pulley to align the

timing notches.

Raise the lift and finish fitting the timing belt.

Check the timing.

2. Use a screwdriver to apply a force to the

automatic tensioner to adjust the tensioner

to maximum tension. Then

tensioner bolt to the mount. Remove tool

1860905000 and turn the engine through

two revolutions in its normal direction of

3. Loosen the nut securing tensioner (3) and

apply leverage with a screwdriver so the

tensioner does not go completely slack.

Then align mobile pointer (1) on the ten-

sioner with fixed reference (2). Then

tighten tensioner bolt (3) to the specified

Vil-99,.-LSiip^rs^l jjte\?louS version

Btavo- Brava

Print n° 506.670/27