Bravo-Brava
Copyright Fiat Auto
0
TD 100
Removing - refitting cylinder head
1. Unscrew both retaining screws and re-
move the partition shown.
2. Disconnect both electrical
shown, unscrew the nuts, disconnect
both fuel fittings and then remove the
diesel filter.
3. Loosen the clip and disconnect the pipe
shown, then unscrew the retaining nuts
shown in order to position the oil vapour
separator to one side in the engine bay.
4. Disconnect the accelerator cable from the
points indicated.
5. Disconnect the air pipe to the brake servo
from the vacuum pump.
Engine
10.
connections
1 9