Drive Shafts - Fiat Bravo Service Manual

Hide thumbs Also See for Bravo:

Table of Contents

Auto transmission & differential

R E M O V I N G - R E F I T T I N G

Place the vehicle on ramps, remove the front

wheels, drain the gearbox oil and then pro-

ceed as described below:

1. Relieve the staking then remove the wheel

hub nut (gearbox side and timing gear

2. Remove the wheelarch plastic trim on the

gearbox side by undoing the bolts and re-

taining button shown in the figure. To re-

move the trim, also disconnect the brake

pad wear sensor (repeat the procedure for

the other side).

3. Remove the nut securing the track rod end

to the vertical link, the remove the latter

from the vertical link arm using the puller

1847038000 (repeat the procedure on the

other track rod end).

4. Remove the bolts securing the vertical link

(gearbox side and timing gear side) to the

shock absorber.

Drive shafts