Clutch
Clutch operation
18.
2
R E M O V I N G - R E F I T T I N G C L U T C H P E D A L
Before removing the clutch pedal, re-
move the accelerator pedal as de-
scribed in "Section 10 - Fuel system".
1. Remove the roll pin retaining the clutch
pump rod to the pedal.
2. Remove the car brake light switch to facil-
itate access to the clutch and brake pedal
retaining bolt.
3. Unscrew the bolt retaining the clutch and
brake pedal, withdraw in the arrowed d i -
rection until the clutch pedal is released.
If brake pedal removal is not required,
do not take the bolt retaining
clutch and brake pedal any further
out.
4. Release the clutch pedal from the clutch
pump rod and remove from the pedal unit.
Bravo-Brava
the
Publication no. 508.876