Throttle Cable Installation - Mercury 80 Owner's Manual

a - Fuel hose retainer

THROTTLE CABLE INSTALLATION

Install cables into the remote control following the instructions provided with the remote control.
1. Remove the access cover from the bottom cowl.
NOTE: The high pressure fuel hose can be moved out of the way for additional access.
a
a - Access cover
2. Position remote control into neutral.
3. Install the throttle cable to the throttle arm with the retainer clip.
4. Adjust the cable barrel so that the installed throttle cable will hold the throttle arm against the idle stop.
5. Fit the throttle cable through the front grommet.
6. Place cable barrel into barrel retainer.
OUTBOARD INSTALLATION
a
b
b - High pressure fuel hose
b - High pressure fuel hose
N
ob00351
78
a
20905
b
20893