Manual Tilt System Installation - Mercury 40 Service Manual

Manual Tilt System
Installation
1. Apply 2-4-C Marine Lubricant to lower pivot pin
hole and pivot pin surface.
2. Start lower pivot pin into pivot pin hole and posi-
tion lower dowel pin (retained) in its hole.
a
95
95 2-4-C w/Teflon (92-850736A1)
a - Lower Pivot Pin
b - Lower Dowel Pin
3. Reinstall manual tilt system, bottom first. Recon-
nect release valve link rod.
a - Manual Tilt System
90-852572R1 JANUARY 1998
b
51148
2
a
1
51144
4. Using a suitable punch, drive lower pivot pin into
clamp bracket and trim cylinder assembly until
pivot pin is flush with outside surface.
a - Lower Pivot Pin
5. Using a punch, drive lower dowel pin in until
seated.
a
a - Lower Dowel Pin
a
51147
51148
MID-SECTION - 5F-35