Power Trim Disassembly - Mercury 40 Service Manual

6. Use suitable punch to remove (Drive Up) lower
pin. Retain dowel pin.
a
a - Dowel Pin
7. Use suitable punch to drive out lower pivot pin.
a
a - Lower Pivot Pin
5D-28 - MID-SECTION

Power Trim Disassembly

IMPORTANT: Power trim system is pressurized.
Trim rod must be in the full "UP" position (fully
extended prior to fill/drain plug, or manual re-
lease valve removal.
1. Remove reservoir cap.
2. Remove manual release valve assembly to drain
oil.
51144
a - Reservoir Cap
b - Manual Release Valve
51144
a
b
55263
90-852572R1 JANUARY 1998