Acm Zone Options (Address 2740-2769); Acm Global Flags (Address 2780); Acm Timeouts (Address 2782-2783) - NAPCO GEMINI GEM-P3200 Programming Instructions Manual

Page 38
ACM ZONE OPTIONS:
Enter the Zone numbers (in decimal 1-48 format) for each option in the table below. Press
NOTE: Dark shaded data value box shows option not available. Note: The Area # for Door 1 is controlled by the ex-
isting Keypad Programming table (Address 2425 to 2431). The assigned area for Door #2 for each ACM must be en-
tered in the table below (addresses 2748 and 2758) and must not be left blank if Door 2 is to be used.
ACM1 Zone Options ADDR
2740
Door Contact
Forced Entry Zone 2741
Door Ajar Zone 2742
Area # for Door 2
Reserved 2743
Reserved 2744
ACM2 Zone Options ADDR
Door Contact 2750
Forced Entry Zone 2751
Door Ajar Zone 2752
Area # for Door 2
2753
Reserved
Reserved 2754
ACM Global Flags
2780
Option
Default
1
OFF
OFF 2 Enable NAPCO Proprietary Access Format
3
OFF
4
OFF Enable Access Logging into Burg Log
OFF 5
Enable Printing of Access Events
OFF 6
Enable Card Presentation Beep and Green LED Flash
OFF 7
OFF
8
Maximum ADDRESS 2782
Two-Swipe
Arm Time
(x100ms)
[Default = 030 = 3 seconds.]
Enable ACM Access (address 2423) must be enabled.
Address 2782 determines the maximum time allowed for the double swipe (x100ms). Address 2783 determines the door unlock
time, in seconds, after a successful entry.
1. Select timeout (1-255).
2. Enter in corresponding address locations above and right. Press
X
GEM-P3200 Programming Instructions
ACM ZONE OPTI ONS (ADDRESS 2740-2769)
ADDR
Door 1 Door 2
2745
2746
2747
2748
2749
ADDR
Door 1 Door 2
2755
2756
2757
2758
2759
A CM GLOBA L F L AGS (AD DRESS 278 0)
Enable Two-Swipe Arming
Enable Facility Code
RESERVED
RESERVED
ACM TIM EOU TS (ADDRESS 2782-2783)
ADDRESS 2783
Unlock Time
(sec.)
[Default = 005 = 5 sec.]
U
ACM GLOBAL FLAGS:
1. Select the desired option entering the option number
(1-8) for each digit.
2. Enter corresponding option number in address loca-
tion.
NOTE: Dark shaded data value box shows option not
U
available. Press or
U D
or to save.
L
WI818G 10/05
D
or to save.
D
to save.
NAPCO Security Systems