NAPCO GEMINI GEM-P3200 Programming Instructions Manual page 9

WI818G 10/05
Central Station
Account # (____)
(Direct Entry)
S e e W I f o r I n f o
R c v r F o r m a t ( 0 )
(Direct Entry)
DATA CS RECEIVER 1 FORMAT
ENTRY
blank(•) Ademco Slow, Silent Knight Slow
1 Sescoa, Vertex, DCI, Franklin
Fast
2 Radionics Fast
3 Silent Knight Fast
4 Radionics, DCI, Franklin Slow
5 Universal High Speed
8 Radionics BFSK
L
NAPCO Security Systems
Central Station Receiver 1 Account Number
•
Enter an account number of up to four digits.
•
Press through for digits 0–9, and
0 9
U
•
Press to save and press the NEXT/YES button to proceed.
NOTE: Central Station Receiver 2 and 3 Account Numbers must be entered in Direct Address Pro-
gramming. See CS Reporting Options.
Central Station Receiver 1 Format
•
From the table at the right enter the receiver format.
•
Press through , and
0 9
•
Press G1 through G4
U
•
Press to save and press the NEXT/YES button to proceed.
DATA CS RECEIVER 1 FORMAT
ENTRY
9 FBI 4/3/1
0 Radionics Modem 2
B SIA
C Ademco Point ID
D Ademco Express
E Pager
for a blank (
G 0
•
for blank ( ).
G0
for letters B–E.
NOTE: Modem IIe is available only in
Direct Address Programming. Central
Station Receiver 2 and 3 Formats can
only be entered in Direct Address
Programming. See CS Receiver
Options.
X
GEM-P3200 Programming Instructions
Page 9
•
).