ZONE OPTIONS - ZONE S 1 T O 16 (ADDRESS 0900-1016)
ZONE OPTIONS
50ms Loop Response (A)
Priority
Priority with Bypass
Auto-Bypass
Selective Bypass
Keyswitch Arming
Auto-Bypass Re-entry
Pre-Alarm Warning
Never Arm
24-Hour Zone
Alarm Output
Pulsed Alarm Output
PGM1 Output
PGM2 Output
Entry/Exit 1
Entry/Exit 2
Exit/Entry Follower
Auto Reset
Swinger Shutdown
Chime
Abort Delay
Power-up Delay
Day Zone Open
Day Zone Short
Alarm on Day Zone
Alarm Telco 1
Alarm Restore 1
Trouble Telco 1
Trouble Restore 1
Alarm Telco 3
Alarm Restore 3
Trouble Telco 3
Trouble Restore 3
No EOL Resistor
Trouble on Open
Trouble on Short
Zone Area 1
RESERVED
RESERVED
RESERVED
Interior (Stay) Bypass
Keypad Sounder on Alarm
2-Wire Smoke Detectors (B)
Fire (C)
Fire Alarm Verification (C)
RESERVED
Zone ANDing Group 1
Zone ANDing Group 2
Zone ANDing Group 3
Zone ANDing Group 4
Sensor Watch
RESERVED
Chime 2
RESERVED
RESERVED
When the Easy Program Menu is used, these features are enabled by default.
Enabled when "Enable SIA CP-01 Features?" is activated (Answer "Yes" in the EZ Programming Menu).
Disabled when "Enable SIA CP-01 Features?" is activated (Answer "Yes" in the EZ Programming Menu). Disable Auto-Reset on non-fire zones for SIA CP-01 installations.
ZONE OPTIONS: Select zone options for any zone.
1.
Select the desired zone option by entering the option number (1-8) for each selected zone.
2.
Enter corresponding option number in address location.
NOTE: Dark shaded data value box shows option not available. Press [Enter] to save.