Installation Procedure - Ricoh B202 Service Manual

Installation Procedure


CAUTION
Do the following before you install this option:
1. Print out all data in the printer buffer if there is a printer option in the
machine.
2. Press the operation switch to the standby mode. Make sure the power
LED is not lit. Then turn off the main switch and disconnect the power
cord and the network cable.
[A]
B713I001.WMF
1. Remove the fax controller board [A] from the fax controller base [B] ( x 3, 
x 6).
SM
G3 INTERFACE UNIT
[B]
7 B712