Paper Output Tray - Ricoh B202 Service Manual

Paper Output Tray

You can select output trays as follows: User Tools > System Settings > Tray Paper
Settings. If a print job does not specify an output tray or if the driver specifies the
default tray, the output tray selected with this user tool will be used.
Output Tray Selected
• If the machine cannot print to the selected output tray, it prints to the default
paper output tray.
• If paper overflow is detected at the selected output tray, the controller suspends
printing.
Stapling
The optional two-tray finisher and booklet finisher can staple papers. Both finishers
support the following stapling positions:
[A]: One staple (vertical) is at the rear right
corner.
[B]: Two staples (vertical) are at the right
middle edge.
[C]: One staple (vertical) is at the front right
corner.
The two-tray finisher supports the following
stapling position (the booklet finisher does
not):
[D]: One staple (slant) is at the front right
corner.
The booklet finisher supports the following
stapling position (the two-tray finisher does
not):
[E]: Two staples (vertical) are at the center.
The table lists the number of papers that the finishers can staple.
Two-tray finisher
Booklet finisher
NOTE:
For more paper sizes, see the specifications.
SM
Position
[A][B][C][D]
[A][B][C]
[E]
6-109
PRINTER FUNCTIONS
Paper exit
B178D594.WMF
Paper size
A4, B5, LT A3, Ledger, Legal
50 sheets 30 sheets
50 sheets 25 sheets
— 10 sheets
[A]
[B]
[C]
[D]
[E]
B202/B178/B180