OPTIONAL UNIT
Adjusting the Height
1. Check the optional paper tray type:
• Go to step 2 if the optional two-tray paper feed unit or the optional LCT is
installed.
• Go to "Main Body." if either of them is not installed.
2. Tape the pads [A] to the right-hand side of the machine.
3. Lay the machine on its right-hand side.
4. Remove the adjuster plates [B] ( x 2).
5. Change the height [C].
6. Reinstall the adjuster plates [D] ( x 2).
7. Take the machine out of the box and stand it up.
8. Check that the height is correct. Then remove the pads.
B202/B178/B180
[B]
[A]
B602I008.WMF
1-40
[D]
[C]
B602I901.WMF
SM