1.11.6 CHAD BOX FULL SENSOR BOARD AND LED BOARD
1. Punch unit controller (! 1.11.3)
2. Remove the whole punch unit from the
saddle finisher.
3. Protector [A] ( x 2)
4. Sensor board [B] ( x 1)
NOTE: After replacing the sensor board,
adjust the sensor voltage (!
1.11.7).
5. LED board [C] ( x 1, x 1)
NOTE: After replacing the LED board,
adjust the sensor voltage (!
1.11.7).
SM
PUNCH UNIT, MOTORS, AND CONTROLLER
[A]
[B]
[C]
37
B602R984.WMF
B602R985.WMF
B602R986.WMF
B602