FAX UNIT
Installation Procedure
CAUTION
Do the following before you install this option:
1. Print out all data in the printer buffer if there is a printer option in the
machine.
2. Press the operation switch to the standby mode. Make sure the power
LED is not lit. Then turn off the main switch and disconnect the power
cord and the network cable.
1. Remove the option cover [A]
( x 2).
2. Change the position of the jogger
switch [B] from "OFF" to "ON".
3. Carefully press down the MBU.
NOTE: Make sure that the MBU is
seated correctly. If not, SC819
occurs.
4. Install the fax unit [C] ( x 2).
5. Attach the serial number decal [D] on
the rear cover.
6. Attach the FCC decal on the rear
cover (only for USA/Canada).
7. Remove the key cover [E]. Then
install one of the fax keys [F].
8. Remove the panel cover [G]. Then
install the fax panel [H].
B712
[D]
[B]
[C]
[F]
[E]
4
[A]
B712I001.WMF
[H]
[G]
B603I902.WMF
SM