Installation Procedure - Ricoh B202 Service Manual

Installation Procedure


CAUTION
Remove the tape from the development units (see step 2) before you turn
the main switch on. The development units can be severely damaged if you
do not remove the tape.
Put the copier on the paper tray unit or the LCT first if you will install an optional
paper tray unit or the optional LCT at the same time. Then install the copier and
other options.
NOTE: Keep the shipping retainers after you install the machine. You may need
them in the future if you transport the machine to another location.
1. Remove the tape and padding on the copier.
2. Remove the pin [A].
NOTE: Keep the pin. You may need it if you want to transport the machine
( 1.4.3).
3. Remove all tapes from the four development units.
4. Turn the transfer belt release lever clockwise.
SM
[A]
B178I501.WMF
1-7
MACHINE INSTALLATION
B178I502.WMF
B202/B178/B180/