Service Tables; Service Program Mode; Service Program Mode Operation; Entering And Exiting Sp Mode - Ricoh B202 Service Manual

Hide thumbs Also See for B202:

Table of Contents

4. SERVICE TABLES

Never turn off the main power switch when the power LED is lit or flashing.

To avoid damaging the hard disk or memory, press the operation power

switch to switch the power off, wait for the power LED to go off, and then

switch the main power switch off.

NOTE: The main power LED (

ARDF is open, while the main machine is communicating with a facsimile

or the network server, or while the machine is accessing the hard disk or

memory for reading or writing data.

4.1 SERVICE PROGRAM MODE

The service program (SP) mode is used to check electrical data, change modes,

and adjust values.

1. Press the Clear Mode key.

2. Use the keypad to enter "107".

3. Hold down Clear/Stop for at least 3 seconds.

4. On the touch-panel, press Fax SP.

5. Press Exit twice to return to the copy window.

) lights or flashes while the platen cover or

Table of Contents