Service Mode Lock/Unlock - Ricoh B202 Service Manual

You must turn the main switch off and on after exiting service mode to
NOTE:
make the following settings effective.
SP Modes Related to the Engine
SP2-208-009
SP2-213-001
SP2-224-001 to 004
SP5-150-001
SP5-994-001 and 002
SP5-998-001
SP5-999
If the settings of SP modes 5-993-013 to 015 are changed, these changes
NOTE:
will affect the next line position adjustment.

Service Mode Lock/Unlock

At locations where the machine contains sensitive data, the customer engineer
cannot operate the machine until the Administrator turns the service mode lock off.
This function makes sure that work on the machine is always done with the
permission of the Administrator.
1. If you cannot go into the SP mode, ask the Administrator to log in with the User
Tool and then set "Service Mode Lock" to OFF after he or she logs in:
User Tools > System Settings > Administrator Tools > Service Mode Lock >
OFF
•
This unlocks the machine and lets you get access to all the SP codes.
•
The CE can service the machine and turn the machine off and on. It is not
necessary to ask the Administrator to log in again each time the machine is
turned on.
2. Go into the SP mode and set SP 5169 to "1" if you must use the printer bit
switches.
3. After machine servicing is completed:
• Change SP 5169 from "1" to "0".
• Turn the machine off and on. Tell the administrator that you have completed
servicing the machine.
• The Administrator will then set the "Service Mode Lock" to ON.
SM
SERVICE PROGRAM MODE
SP Modes Related to the Controller
SP5-302-002
SP5-801-003 to 013
SP5-824-001
SP5-825-001
SP5-832-001 to 011
5-5 B202/B178/B180