Finisher Main Board; Punch Hole Position Adjustment - Ricoh B202 Service Manual

1.15 FINISHER MAIN BOARD

1. Rear cover (! 1.1.1)
2. Main PCB [A] ( x 6, All )

1.16 PUNCH HOLE POSITION ADJUSTMENT

To adjust the position of the punch holes in the paper feed direction, use the
appropriate SP mode.
To adjust the horizontal position of the holes, use the spacers provided with the
punch unit.
1. Rear cover (! 1.1.1)
2. Punch unit [A] ( x 3,  x 5)
3. Spacers [B]
The punch position can be adjusted
by up to 4 mm using combinations
of the 3 spacers provided with the
finisher.
SM
[A]
[B]
11
FINISHER MAIN BOARD
B599R206.WMF
[A]
B599R119.WMF
B599