Fusing - Ricoh B202 Service Manual

Hide thumbs Also See for B202:

Table of Contents

FUSING

Be careful when you handle the fusing unit. It is very hot.

3.12.1 FUSING UNIT

1. Start the SP mode. Then execute the New Unit Set (SP5-999-009).

2. Turn the main switch off.

3. Detach the finisher from the copier if it is installed.

4. Open the duplex inverter unit if it is installed.

5. Open the upper left cover. Then pull it out.

6. Fusing unit [A]

7. Turn the main switch on. The machine starts initialization for the new unit.

If the customer uses thick paper, make some test prints on a sample of the paper

used by the customer after you replace the fusing unit. Adjust the line speed for

thick paper with the following SP if there are any color registration problems:

• SP1-004-007 (Development Motor Speed–[K]

B202/B178/B180

B178R173.WMF

Table of Contents