Auto Continue; Paper Output Tray - Ricoh B867 Manual

Manual Tray Select
If the selected tray does not have the paper size and type specified by the driver, the
controller stops printing until the user loads the correct paper.

5.2.2 AUTO CONTINUE

When this function is enabled, the machine stops printing and cancels the print job if there
is no paper tray which matches the paper size and paper type specified by the driver.
If Auto Continue is enabled, the machine waits for a specified period (0, 1, 5, 10, 15
minutes) for the correct size paper to be set in the tray, then cancels the print job if the
interval expires.
The interval can be set via Printer Settings in the user tools.
(User Tools/ Printer Settings/ System/ Auto Continue)
If Auto Continue is disabled, the machine will not print the job, but will not cancel it, so the
job stays in the print queue.
The default setting for Auto Continue is "Off."

5.2.3 PAPER OUTPUT TRAY

The default paper output tray for each application (copy/fax/printer) can be selected using
the System Settings menu within User Tools.
(User Tools/ System Settings/ General Features)
If a print job does not specify an output tray or if the driver specifies the default tray, the
default paper output tray is used.
SM 131
Controller Functions
B867