GMC 1976 ZEO 6083 Maintenance Manual page 838

VENT SCREEN
CRANK HANDLES
POWER VENT
A-3686
INSTALLATION
1 . Install vent screen . Tighten six retaining
screws securely.
EXHAUST VENTS 24P- 3
VENT SCREEN
b
NON-POWER VENT A-3687
Figure 3-Ceiling Non-Power Vent
VENT GASKET REPLACEMENT
1 . Fully open vent.
Figure 2-Ceiling Power Vent
2. Remove vent cover by removing retaining
screws from slide mechanism.
2 . Remove vent screen (six screws).
3 . Carefully with the aid of a knife or other suita
NOTE : Use lukewarm water and mild soap solu- ble tool remove gasket from vent cover.
tion if necessary to clean vent screen .
4. Using suitable cement, secure gasket to vent
cover.
5. Reinstall cover on slide mechanism. Tighten
retaining screws securely.
2. Install vent crank handles. Tighten retaining
screws securely .
5. Check for proper operation of vent .