GMC 1976 ZEO 6083 Maintenance Manual page 737

ing:
Figure 15-Removing Blind Cover
5. Remove putty from opening where capillary
tube and discharge tube pass through back of cabi-
net.
6 . Remove sheet metal plate from back of refrig-
erator as shown in Figure 13 .
7. Remove eight retaining screws from con-
denser .
8. Remove mounting screws from compressor .
9. Remove blind cover by performing the follow-
a. Wrap the end of a 3-foot, wood 1 x 6 with
a rag. Then firmly tap on blind cover as shown in
Figure 14, to loosen caulking type seal .
Figure 16-Removing Inverter Assembly
REFRIGERATOR 24D- 7
Figure 17-Disconnecting Wiring
b. Then carefully remove blind cover (See fig-
ure 15).
10 . Pull evaporator plates through opening and
remove cooling unit as an assembly.
INVERTER ASSEMBLY REMOVAL
1 . Remove kick plate.
Figure 18-Removing Bottom Frame