GMC 1976 ZEO 6083 Maintenance Manual page 710

Figure 52-Removing Rear Muffler Mounting Bracket
12 . Remove the starter motor assembly .
Reassembly is done in the reverse order of disas-
sembly . When reinstalling the flywheel, be sure to
align the starter pinion gear with the ring gear (See
figure 55) and torque the flywheel center bolt to 45
ft . lbs. (See figure 56).
STARTER DISASSEMBLY-4KW
(FIGURE 57)
1 . Loosen the nut that attaches the solenoid mo-
Figure 53-Removing Right Hand Air Shroud
ONAN MOTOR GENERATOR 24C- 3 3
Figure 54-Removing Starter Motor Attaching Bolts
for terminal to the field coil connector lead and take
off the connector lead (figure 58).
2. Loosen the retaining screws and remove the
solenoid from the front bracket. Simultaneously, the
fiber washers, the return spring and the solenoid
plunger will be removed (figure 56).
3. Unscrew the through bolts and separate the
yoke with the rear bracket from the front bracket
(figure 60).
Figure 55-Aligning Starter Pinion Gear with Ring
Gear