GMC 1976 ZEO 6083 Maintenance Manual page 26

Figure 10-Removing Screen Track
3 . Close vent . Remove top vent track in same
manner as the screen track. Refer to Figure 10.
4. Now, open vent . Lift vent up into the window
Installation
Figure 12-Installing Vent Track
Figure 1 1-Removing Vent
Figure 13-Seating Vent Track
BODY 1- 9
frame assembly . Pull bottom of vent forward and
remove vent as shown in Figure 11 .
NOTE :
Observe that screen track is wider than,
and sits in front of vent track .
1 . The screen and vent are installed by reversing
removal procedure. Move vent to closed position .
2 . Place vent track in groove and push against
adjacent top vent track, Figure 12 . Use hammer and