Configure Library: Encryption Activation Screen - IBM TS3100 Setup, Operator, And Service Manual

v Feature Code 5900 (Transparent LTO Encryption)
v SAS and Fibre Channel LTO Ultrium 4 Tape Drive (Full High or Half High)
v Ultrium 4 Tape Cartridge
v Library firmware level 4.0 or higher
v Drive firmware level 74H4 or higher
v Encryption Key Manager application
Setting a Drive's Method of Encryption
Figure 4-28. Feature Activation Key screen
Figure 4-29. Configure Library: Encryption Activation screen
1. Click Configure Library > Encryption in the left navigation panel.
2. On the Encryption screen, enter the Feature Activation Key to make available
the library managed and the system managed encryption options.
3. Click Activate to save the key and expand the screen for additional encryption
settings.
4. Select Enable SSL for EKM to enable Secure Sockets Layer for the Encryption
Key Manager application.
Chapter 4. Installation and Configuration
4-27